Part #MA236106POR | Item #7053512 | Manufacturer Part #040A236106RN. This marine valve is a 150 lb Ductile Iron Flanged Gate Valve. Cast Iron, Flanged, DIN Gate Valves, Bolted Bonnet. Чугунные клинкеты ( DIN). Disclaimer: This part is not manufactured by Valley and is not certified by Valley. The Series 2500 Resilient Wedge Gate Valve is furnished in configurations that are UL Listed and FM Approved. 801 Series - Ductile Iron Flanged AWWA C-515 Gate Valves. Valve Size: Please select. The O-rings help to isolate the lubrication chamber. The tensile strength of ductile iron is more than twice that of cast iron.
Contact us for product information or to find a Rep near you. Question about this product? The Series 2500 valve is epoxy coated on the interior and the exterior. Jaelyn made working with Trupply easy and efficient. Cast Iron Flanged Gate Valve Size 3 Inch. Application: Cold Working Pressure. Each: 1, - Inner pack: 1, - Case: 1, - Pallet: 10. UL Listed and FM Approved. For more information, click Product Specifications. Pressure-Energized Bonnet Gaskets. Construction Details. Fusion-Bonded Epoxy. The ductile iron body, bonnet and wedge provide strength and a pressure rating that meets or exceeds the requirements of AWWA C515. Q) I have more technical questions.
This strength and higher pressure rating is provided in a compact, lightweight and easy-to-handle ductile iron valve. "Ship Supply and Ship Repair". MSS Specifications: MSS SP-70. 4″ #4000D AMERICAN VALVE FULL PORT DUCTILE IRON FLANGED BALL VALVE. Collection: F-607-RWS. Ductile Iron Gate Valves - Resilient Wedge.
Ductile iron gate valves feature higher operating pressures and are lighter weight than cast iron. Our Valve body, bonnet, and wedge are constructed with high strength ductile-iron. Q) Who pays for shipping? Packing and gasket: PTFE. Collection: A-2361 Series. The bolt holes and body-to-bonnet flange surfaces are fully epoxy coated. Discs and spreader: Brass. Meets or exceeds performance requirements of AWWA C509 and C515 for 3 in and larger valves. Cast Iron Gate Valve with bronze seat, pressure rating PN 2, 5/6/10, flanged end according to DIN PN 10, bolted bonnet, inside screwed stem, position indicator, non-rising stem and handwheel, solid wedge, short face to face according to EN 558-1, 14 (DIN 3202-F4). Mueller resilient wedge gate valves have features to make them easier to operate. Application: cold and hot fresh water, sea water, lubricating oil, steam etc. SHIP STORE ISTANBUL. Ductile Iron Construction. 150# raised face flanges.
Open right (clockwise) direction of opening. This valve features a pre-grooved stem for tamper switch mounting and is drilled, tapped, and plugged at location "A" for bypass. A) Most items ship with-in 24-48 hrs.
Valve Stem: Outside. Valve OperatorHandwheel. The gaskets are typically reusable, which reduces downtime during any needed repair. Stainless Steel Stem, Bonnet and bolts. Packaging Info: - Quantity Per. Tracking number is available 24 hrs after shipping. Product Description. Flanges to ANSI B16. Valves are fusion bonded epoxy coated interior and exterior to AWWA C550 Standard.
ANSI Specifications: ANSI 372, ANSI 61, ANSI B16. Valve Seat Material: EPDM. Have a question about this part? The thrust washers help provide easy operation by minimizing operating torque. Epoxy coated body inside and out per AWWA C-550 (coating NSF and FDA certified). A) MTRs are provided upon request.
End ConnectionsFlanged.